Press on "Course Walks" in the main menu.
Press on "New" on the bottom toolbar.
Fill out the desired fields.
Press once your are finished.
Press "Ok" to allow CourseWalk to use your current location.
Press "Record Course".
Wait until CourseWalk has aquired your current location.
Start recording by pressing the button.
Start walking your course. The recorded track will be shown in red.
Stop a few steps before the first fence. Press button to add the fence.
The recording is paused while in the "New Fence" window.
Fill out the desired information.
Press "Take a picture" to take a picture of the fence.
Walk around the fence and press to mark the fence position and continue recording the track.
Repeat the previous step for all fences.
Press button to add pictures of waypoints and mandatory flags.
Press button to pause the recording.
If you happen to walk the wrong track, CourseWalk allows you to erase the bad track.
Press button to pause the recording.
Press button to enter the erase mode.
Press button to select section to erase.
Press button to reduce the section to erase.
Press button to delete the section to erase.
Press button to exit the erase mode.
Continue recording by pressing the button.
Press once you cross the finish line to save your course walk.
Next guide: View a course.